Heat Pump FAQ

We've answered a range of questions frequently asked about the Jackgreen Heat Pump Hot Water System. If your question isn't answered below, contact us via email energysave@jackgreen.com.au

Does the unit draw much power?

No, it has the lowest current draw of any Heat Pump on the market, 2.17amps (520watts).

To what temperature will the unit heat the water?

By law all storage hot water heating apparatus must heat water to a minimum 60 degrees Celsius. This unit is more efficient because the water is not overheated.

How much hot water will I get from the unit?

Due to its advanced German design features, you will get approximately 540 litres of shower temperature water* from one tank which is plenty of water for 2-5 people.

If there is a power failure will I need to do anything to the unit?

No, the unit is fully automatic.

If I go away can I turn the unit off?

Yes you can. Turning off will not affect the unit. Just switch the power back on when you get back.

How long should the unit last?

The unit has a design life of fifteen years. This can vary depending on factors such as extremes in weather, water quality and how often you replace the sacrificial anode.

What type of anode does the have?

A high quality Magnesium sacrificial anode.

Will the anode need replacing?

Yes, we recommend replacing it every 3 - 5 years for continued protection, depending upon the water quality in your area.

Does the unit have frost protection?

Yes, it has "Active Defrost". If ice forms on the evaporator below 5 degrees, the hot refrigerant is reversed through the evaporator to defrost it. This enables the unit to heat water efficiently in temperatures down to 0 degrees.

What is the sound level of the unit?

The unit is rated at 49dB (a whisper is around 30dB and a conversation is around 60dB - 70dB).

What type of condenser does the unit have?

Each unit contains an Aluminium Roll Bond Condenser attached to the tank with a heat paste to increase the efficient transfer of heat to the water.

What is the tank made of?

Each tank is 2mm thick mild steel with an award winning vitreous enamel glass lining.

What type of refrigerant is used?

The refrigerant is R134A which is the most commonly used refrigerant on the market.

How long will the refrigerant last?

Longer than the life of the unit.

Does the unit require any maintenance?

When changing the anode inspect the evaporator for dust or build-up, clean with a vacuum.

Why would I install a heat pump over a solar panel system?

The installation of a heat pump is quicker and easier. This is especially relevant when a conventional hot water system has broken down and needs replacing with a more environmentally responsible hot water system.

Will this system give me enough hot water?

The WWK300A heat pump stores 300L; it will deliver 500L of hot water at 40 degrees. This is suitable for a family of up to 5 people. For a larger family (6-8 people), we recommend our WWK300AHA model which has an additional element.

Will this work on off peak?

For a small family off peak 1 is fine. We recommend that if there are 3 or more people, it’s best to switch to off peak 2.

How reliable is a Stiebel hot water system?

Founded in 1924, Stiebel has been synonymous with creating and supplying household products of the highest quality and with the most advanced functionality. In recent times they have also recognised their responsibility to use natural resources in an efficient and thoughtful manner and are constantly developing reliable and efficient water-heating products that use less energy and require less water than other systems. This extensive experience, combined with a passion for excellence and the environment, gives Stiebel hot water systems a leading edge in the industry.